• Lake Ontario Trout and Salm on Fishing…, MLE(make life easier) Tips from the Fish Doctor

    Posted on April 2nd, 2019 admin No comments

     

    This pic has nothing to do with MLE techniques..., just checking to see if any of you boys are reading my blog!

    There is nothing a charter fishing captain who fishes two trips a day, day after day in all kinds of weather and conditions likes any more than something that MAKES LIFE EASIER(MLE)!  Over the years, I have discovered some of these MLE items that will save you time, effort, and money.

     As I prepare for the 2019 charter fishing season beginning in midApril in and around Oswego Harbor trolling shallow for trout and salmon, one of the first things that will makes life easier and save a ton of energy and aggravation is the use of 6 lb. downrigger weights.

     It may not sound like much, but the difference between using 6 lb. and 10-12 lb. downrigger weights when you’re fishing up to two trips day after day is HUGE.  It’s huge as far as saving energy, and it’s even huger when it comes to reducing wear and tear on your body and equipment.

     Here’s the deal.  Most anglers use the same 10 or 12 lb. rigger weights all season, whether they’re fishing shallow or deep.  However, there is actually no need for the heavier rigger weight when you’re fishing shallow, especially at early spring brown trout depths or offshore spring steelhead depths shallower than 10-15 feet.  The lighter rigger weights work fine with minimal blowback.

     If you’re using downriggers mounted either astern or abeam with booms long enough to require a retro-ease, which is used to pull the weight close enough for rigging, there is a huge difference between pulling a light rigger weight and a heavier weight to the boat.  If you’re using a heavy weight, you have to grab on to the retro-ease line firmly with your full hand, pull it to the boat, and lock it in place with the chock.  It takes some “umphh”!  When you get it locked in place, if the water is rough, you all know what happens.  The weight starts to rock and roll, putting a lot of stress on your retro-ease line, downrigger boom, rigger cable, terminal snap, etc., etc.  Put too much stress on the cable connection to the weight too many times, and you hear the dreaded splash as the cable breaks and the weight heads for bottom.  Been there, done that, eh?

     Now, with the lighter 6 lb. MLE weights,  you grasp the retro-ease line with a couple of fingers, easily pull the light weight to the boat and lock it in the chock.  When it’s rough, the little weight bobs around a bit, but doesn’t put much stress on your gear.

     This MLE tip saves me tons of energy thru the season whenever I’m trolling shallow.

     The other major benefit of 6# weights over larger weights…, completely different signature with far less “disturbance” in the water .  The result…, trout and salmon hitting on shorter setbacks.

    Comments are closed.